|
|
|
|
|
|
|
|
|
|
|
 |
|
The Commercial Trus-T-Lift
Fully
Code Compliant
YES WE CAN!
What exactly is
a code compliant vertical platform lift?
There are 9 different national codes that
regulate the design and installation of vertical
platform lifts in the U.S. Each state and in
some cases municipalities within a state will
follow one of the nine different codes and then
in many cases make changes and additions to the
code. Also, individual elevator inspectors may
have their own requirements for a particular
application. Sounds confusing? It is if you
attempt to supply your customer with a vertical
lift prior to finding out what the local
Elevator authority requirements are first. It’s
a bit like getting in your car and driving
without knowing where it is that you want to go.
|
|
|
|
|
|
|
|
|
How can I meet the
code and regulatory requirements?
The short answer is that we can configure a RAM
Lift to meet any code requirement for vertical
platform lifts and meet most individual
inspector requirements. Our team at RAM
Manufacturing Ltd. has been installing vertical
platform lifts in commercial and residential
buildings for over 20 years and we will work
with you to successfully complete your lift
project.
For a successful project follow these steps:
- Gather information on the project such
as Building address, lifting height and lift
configuration (use Design-A –Lift for the
configuration or scan a copy of the building
plans).
- Email or fax the building information to
RAM and we will provide you with an
installation drawing showing the technical
specifications.
- Submit the drawings to the local
elevator regulatory authority and discuss
the application with them to determine if
there are any additional requirements.
- Provide the inspector requirements to
RAM, we can then supply you with an
appropriate lift quote and final
installation drawings.
|
|
|
 |
| |
|
|
|
| |
Trus-T-Lift
wheelchair lifts allow people with
mobility issues to remain active,
improving the quality of life. It's
there personal freedom, and that is
important to us… That is our job.
Safety, comfort
and convenience were Trus-T-Lifts
#1 design considerations.
Features
-
Innovative
Soft Touch Control Pads for ease of
operation.
-
Direct drive
Worm-Gear / Screw-Nut Drive for
maintenance free operation,
incorporating zero load start for cold
weather climates (drive system allows
motor to get up to full speed before
lifting car).
-
Expanded
Metal Platform allows full under
platform visibility.
-
Keyed
Emergency Stop to control use of lift.
|
|
 |
| |
|
|
|
 |
| |
Smooth and
quiet performance makes this light
weight, dependable and versatile unit
perfect for any residential or
commercial application.
We are proud
to to say we manufacture the highest
quality Wheelchair Lift / Platform Lift in
the world. In addition to the quality is
the price. You will not find a better
price on a fully code compliant Wheelchair
Lift anywhere in the world. |
|
|
| |
|
|
| |
"Installation":
Installing the commercial Trus-T-Lift is
simple, smooth and easy. In most parts
of the country it is required that the
lift be installed by a licensed elevator
installer, however is some parts of our
country a licenses in not required. We
recommended you contact your local
building /elevator department to be sure
what is required of the installer. Trus-T-Lift
does not require credentials however,
Any installer accepting the role of
installing the lift also accepts the
responsibility of any problems that
should arise due to incorrect
installation. Trus-T-Lift is happy to
give advise and guidance during
installation. Simply call Tru-T-Lift
directly and to speak with tech support.
|
|
|
 |
| |
|
|
|
 |
|
"Straight Trough":
Straight through application means that
the lift would be entered by one side
and after raising and reaching the
destination landing would be exited on
the opposite side. |
|
|
| |
|
|
| |
|
|
|
 |
|
"Adjacent Access":
Adjacent access application means that
the lift would be entered by one side
and after raising and reaching the
destination landing would be exited to
the right or left.
"Same Side":
Same side
application means
that the lift would be entered by one
side and after raising and reaching the
destination landing would be exited at
the same location it was entered.
The Trus-T-Lift
can be ordered to travel up to
12' Feet and can be
used with many applications.
|
|
|
| |
|
|
